// Speakers //

- ATC -

SCM 7 SCM 10 Active SCM 10 Passive SCM 12 SCM 20 SL SCM 20 SL Tower SCM 20 ASL

SCM 35 T16 SCM 50 SCM 70 SCM 100 SCM 150

For the most up-to-date inventory, please contact Magic Zoo Audio today!

ATC SCM 7 Compact 7 litre passive two-way loudspeaker, designed for the small to medium Stereo and Multichannel installation. Selected 25mm Rare Earth Neodymium magnet Soft Dome HF driver, 125mm mid/bass driver, incorporating Soft Dome Technology, a feature of all ATC drive units, gives a wide and even horizontal sound field vital for accurate Stereo and Multichannel imaging. Short Voice Coils using high density edgewound flat OFC wire in a long narrow magnetic gap, giving reduced distortion, high power handling and long-term reliability. With recommended power amplifiers of between 50-300 watts per channel, the SCM7 is capable of up to 103dB SPL continuous. Bi-wiring capable.

ATC SCM 10 Active Innovative Two-Way loudspeaker with 10 litre curved enclosure. Aluminium and heavyweight laminated MDF composite eliminate cabinet resonance and diffraction problems.Finished in high gloss lacquer.Selected 25mm Rare Earth Neodymium magnet Soft Dome HF driver for superb high frequency reproduction. 3.5 kilo high gauss 125mm Mid/Bass driver, ruggedly handbuilt without compromise by ATC to professional standards. On board 250watt proprietary Twin channel amplifier, with Grounded Source® topology produces 50watts to HF driver, 200watts to Mid/ Bass driver. Featuring independent power supplies to each channel, and operating in ultra low distortion, Class A mode up to 2/3rds maximum output. Capable of up to 105dB continuous Power Output, with substantial transient headroom. The Active 10 is capable of meeting power requirements of current high bit rate Stereo, Multichannel music and film soundtracks. Has 4th order electronic crossovers, eliminate phase and harmonic distortions and power loss, caused by typical passive crossovers.

ATC SCM 10 Passive Innovative Two-Way loudspeaker with 10 litre curved enclosure. Aluminium and heavyweight laminated MDF composite eliminate cabinet resonance and diffraction problems. Finished in high gloss lacquer. Selected 25mm Rare Earth Neodymium magnet Soft Dome HF driver for superb high frequency reproduction. 3.5 kilo high gauss 125mm Mid/Bass driver, ruggedly handbuilt without compromise by ATC to professional standards. Capable of up to 105dB continuous Power Output, with substantial transient headroom. The Passive 10 is capable of meeting power requirements of current high bit rate Stereo, Multichannel music and film soundtracks. The Passive 10 is suitable for amplifiers of between 50 and 300 watts. Bi-wiring capable.

ATC SCM 12 High Performance 12 litre passive 2 way system capable of outstanding levels of music and soundtrack reproduction. Hand built driver features a 75mm mid range soft dome mechanically coupled onto a 150mm bass cone. The 177mm very high flux, super linear magnet achieves excellent linearity and low distortion whilst offering exceptional power handling and dynamic range. Bi-wiring capable

ATC SCM 20 SL ATC's highly successful award-winning 20 litre two-way loudspeaker designed for medium sized Stereo and Multichannel installations, and high power studio meter bridge monitoring. Braced inert cabinet, to eliminate resonance. Selected 25mm Rare Earth Neodymium magnet Soft Dome HF driver for superb high frequency reproduction. Heavyweight high gauss 150mm Mid/Bass driver, ruggedly handbuilt without compromise by ATC to professional standards. Super Linear Magnet Systems developed by ATC reduces harmonic distortion, improving clarity and dynamics in the critical mid-band and dramatically improving depth and precision in the bass. Capable of up to 108dB continuous Power Output, with substantial transient headroom. The SCM20 is capable of meeting power requirements of current high bit rate Stereo, Multichannel music and film soundtracks.

ATC T16 The two-way Active T16 is encased in a high gloss silver, curved, heavily damped aluminium casting with an 18mm thick ergonomic inert baffle. Selected 25mm Rare Earth Neodymium magnet Soft Dome HF driver for superb high frequency reproduction. Heavyweight high gauss 150mm Mid/Bass driver, ruggedly handbuilt without compromise by ATC to professional standards. On board 250 watt proprietary Twin channel amplifier, with Grounded Source¨ topology produces 50watts to HF driver, 200watts to Mid/Bass driver. Featuring independent power supplies to each channel, and operating in ultra low distortion, Class A mode up to 2/3rds maximum output. Capable of up to 108dB continuous Power Output, with substantial transient headroom. The T16 is capable of meeting power requirements of current high bit rate Stereo, Multichannel music and film soundtracks. 4th order electronic crossovers, eliminate phase and harmonic distortions and power loss, caused by typical passive crossovers

ATC SCM 70 Setting a new reference level for all current and anticipated audio formats, The SCM 70 represents the culmination of 25 years of continuous acoustic and electronic research by Billy Woodman and ATC's dedicated research and development team. High performance 25mm tweeter, features a silver voice coil and double magnet system giving a flat frequency response and high cut-off frequency. ATC's hand built Soft Domed SM75-150S mid range driver, features a new wave guide, giving an even better impulse response. This improves the phenomenal accuracy, transparency and dynamics of this remarkable mid range driver. ATC's 234mm (9") bass driver incorporating the company's unique Super Linear Magnet technology, features additional voice coil spacers, giving extended cone excursion and smooth low frequency response. The SCM 70 Active Loudspeakers On board fully discrete 350 watt proprietary Tri channel amplifier, with Grounded Source® topology produces 50 watts to HF driver, 100 watts to mid driver and 200 watts to Bass. Featuring second order filters, isolated secondary power supplies and programme-sensing auto power off. Operating in low distortion, Class A mode up to 2/3rds maximum output. Capable of up to 112dB continuous Power Output, with substantial transient headroom. The Active SCM70 is capable of meeting power requirements of current high bit rate Stereo, Multi-channel music and film soundtracks.

ATC SCM 150 The New Active 150 Three-Way loudspeaker is housed in a heavily braced inert cabinet, to eliminate resonance. High performance 25mm tweeter, features a silver voice coil and double magnet system giving a flatter frequency response and a higher cut-off frequency. ATC's hand-built Super Linear Soft Domed SM75-150S mid range driver, features a new wave guide, giving an even better impulse response. ATC's 375mm (15inch) bass driver incorporating the company's unique Super Linear Magnet technology, features additional voice coil spacers, giving greater cone excursion and smoother low frequency response. To handle the additional low frequency energy, the port tube now features a new flared opening. On board 350watt proprietary Tri channel amplifier, with Grounded Source® topology produces 50watts to HF driver, 100 watts to Mid driver and 200 watts to Bass. Featuring independent power supplies to each channel, and operating in ultra low distortion, Class A mode up to 2/3rds maximum output. Capable of up to 118dB continuous Power Output. Also available without on-board amplifiers, as the Passive 150, suitable for amplifiers of between 100 to 1,000 watts.

- Multi Channel (Surround Sound Speakers) -

ATC C1 Collection

		- ACCENTUS -
Full technical specifications on any of the speakers listed below are available in-store or over the phone. Please contact us for more information.
Accentus 101 Design: 3-way 5 drivers Frequency response: 32Hz – 40kHz.  36Hz – 40kHz±3dB,  -6dB at 32Hz. Measured in an anechoic chamber. Dispersion: Horizontal off-axis 30º, -3dB. Vertical off-axis 5º, -3dB. Sensitivity: 92dB/W/M, sine wave measure. Impedance: (Nominal 4Ω) The Minimum 3.2Ω/65Hz. The Maximum 15Ω/1200Hz. Power requirement (RMS): 50 – 350W recommended.
		Accentus 102 Design: 3-way, 4 drivers, integrated design (regarding many drivers,  speaker cabinet and crossover as an integrated system for  designation). Frequency response: 32Hz – 40kHz.  36Hz – 40kHz±-6dB at 32Hz. Measured in anechoic chamber. Dispersion: Horizontal off-axis 30º, -3dB.  Vertical off-axis 5º, -3dB. Sensitivity: 90dB/W/M, sine wave measure. Impedance: 4Ω. The minimum 4Ω/60Hz., the maximum 12.5Ω/1300Hz. Power requirement (RMS): 50 – 250W recommended.
Accentus 200 Design: 3-Way,  4 drivers Frequency response: 32Hz – 40kHz 36Hz – 40kHz±3dB,  -6dB at 32Hz  measured in an anechoic chamber Dispersion: Horizontal off-axis 30º, -3dB.  Vertical off-axis 10º, -3dB. Sensitivity: 90dB/W/M sine wave measure Impedance: 4Ω. the minimum 3.3Ω/65Hz, the maximum 14.5Ω/1300Hz. Power requirement (RMS): 50 – 250W recommended.
		Accentus 300 Design: 3-way, 3 drivers Frequency Response: 38Hz-40kHz. 43Hz-40kHz±, -6dB @ 38Hz. Measured in an anechoic chamber. Dispersion: Horizontal off-axis 30˚ -3dB.  Vertical off-axis 10˚-3dB. Sensitivity: 88dB/W/M sine wave measure Impedance: 8Ω  (Nominal 8ohm) minimum 4.5Ω/95Hz,  maximum 16Ω/1500Hz. Power requirement (RMS): 50 – 250W recommended.
Also available: Bookshelf Speakers Concept 1 AKS Floor Standing Speakers Concept 2 AKS Center Channel Speakers AVS Center Channel